High Flow Fuel Pump

High Flow Fuel Pump

900,00 DKK


Model/Varenr.: aem50-1000
Lagerstatus: på lager.
stk.

AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.

AEM High Flow In-Tank Fuel Pump Features:

  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In-Tank design
  • Tested to flow 320 lph @ 43 PSI
  • 39mm diameter fits most applications
  • Offset inlet design eases installation
  • Each pump individually tested
  • For gasoline vehicles (pump life may be diminished when used with E85 fuel)
  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

    AEM High Flow In-Tank Fuel Pumps Flow vs Power Graph (Right) & Flow vs Pressure/Current (Left).

    TECHNICAL SPECS:

    Weight: 10.1oz (285grams)

    Outside Diameter: 39mm OD

    External Materials: Black plated steel with laser etching

    Inlet Fitting: 7.7mm ID, 11.0mm OD

    Outlet Fitting: 8 mm hose clamp

    PRV Activation: 80 PSI

    Impeller Design: Single Scroll Hard Anodized Aluminum Turbine


    VOLTAGE SPECS:

    Connector Terminal: 6 mm Spade (pos/neg)

    Min Voltage Input: 6 volts

    Max Voltage Input: 18 volts

    Current Draw (40 psi): 12 amps (13.5v)

    Current Draw (80 psi): 15 amps (13.5v)


    * Power rating given at 43 PSI, 13.5v at the pump with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.